3076130 Injector Fit For Cummins K19 Engine

The Cummins KTA19 is a robust and widely used diesel engine, often found in industrial, marine, and power generation applications. Here are the key specifications for the Cummins KTA19 engine:

General Specifications:

• Engine Type: 4-cycle, inline 6-cylinder, turbocharged and aftercooled (sometimes denoted as TA)
• Displacement: 19 liters (1150 cubic inches)
• Bore x Stroke: 159 mm x 159 mm (6.25 in x 6.25 in)
• Compression Ratio: 14.5:1
• Aspiration: Turbocharged and Aftercooled
• Fuel System: PT (Pressure-Time) fuel system
• Governor Type: Mechanical or Electronic (depending on the specific model)

Performance Specifications:

• Power Output: Varies depending on the specific configuration, typically in the range of 500 to 700 horsepower (373 to 522 kW) at 1800 to 2100 RPM.
• Torque Output: Typically in the range of 1800 to 2100 lb-ft (2440 to 2850 Nm)
• Fuel Consumption: Varies depending on load and configuration, typically around 0.36 to 0.40 lb/hp/hr (220 to 250 g/kWh)

Physical Dimensions:

• Length: Approximately 1,698 mm (66.9 in)
• Width: Approximately 1,122 mm (44.2 in)
• Height: Approximately 1,587 mm (62.5 in)
• Dry Weight: Approximately 1,870 kg (4,123 lbs)

Cooling System:

• Coolant Capacity: 45.4 liters (12.0 gallons)
• Cooling Method: Jacket water and aftercooler circuits, typically with separate thermostats

Lubrication System:

• Oil Capacity: 72.6 liters (19.2 gallons)
• Oil Pressure: 207 to 483 kPa (30 to 70 psi) at rated speed

Electrical System:

• Voltage: 24V (standard), with options for 12V
• Starter Motor: Typically 24V electric

Applications:

• Marine: Propulsion engines, auxiliary power units
• Industrial: Pumps, compressors, drilling rigs, and other heavy machinery
• Power Generation: Standby and continuous duty gensets

These specifications can vary slightly depending on the specific variant or configuration of the KTA19 engine. Always refer to the engine’s datasheet or manual for precise details.